Sea Foam Boat Motor Treatment

I know a lot of folks still use Sta-bil in their fuel, and recently after fishing the Tournament at Pick-Wick Lake, I have learned something new to me about a product on the market.

It is called Sea Foam which is good for cars, trucks, snowblowers, lawnmowers, inboards, outboards, motorcycle, snowmobile, tractors, chainsaws; just to mention some of the uses for Sea Foam.

I found out when I got to the lake that my outboard motor sounded like it was missing and choking out. Bill, the guy in the cabin next to me, said have you ever tried Sea Foam. I think I was having problems with carbon build up.

When added to fuel, Sea Foam clean injectors and carbs. It comes in a 16 Fl Oz(1 pint) can and can be found at most of the auto parts stores. I happened to find it at Walmart in the auto department.

Follow the directions for adding the Sea Foam additive to the fuel tank of your equipment.

One 16 Fl Oz can of Sea Foam will treat up to 25 gallons of fuel, and if storing your boat for the winter, mix the proper amount of Sea Foam required for your boat' fuel tank size with the gas then run the motor to allow the fuel mixture to run through the system.

Sea Foam removes moisture from oil crankcase and fuel tanks while stabilizing and conditioning fuels.

The Performance Claim On The Sea Foam Can Was Actually True

The can claimed that I would notice the difference right away, and it was correct in that statement. I ran a short distance and noticed the big change in the way my outboard motor performed. I also saved on how much fuel I burned going down the lake.

Like I have said before, to get something on my website, "It has to be tested by me". Good and bad fishing / boat products are definitely out there and in my decades of buying and using fishing equipment, I've seen plenty of products that failed to perform as promised.

I do not care if a product I try works or not; I will report my findings to my web site visitors.

Sea Foam is a product that worked as promised and is highly recommended by me. See if you do not see a difference when you try it.

If you can not find it in your area contact me and I will find it for you, or write Sea Foam Sales Co. 12987 Pioneer Trail Eden Prairie, MN 55347.

The part number is SF-16 or visit Sea Foam website at www.seafoamsales.com and make sure that you tell them www.BassHogFishing.com sent you to them.

Keep The Hooks Wet!

Steve McGoldrick

Visitor Comments

Leave A Comment
Your Name (Required)
Your Email Address (Required - Will Not Be displayed)
Add Your Comments
Enter Verification Code:
Terms of Service Agreement
I have read, understand and agree to the Terms of Service
	© 2006 - 2008 - The Commentator